RAVI ‘S STANLEY MEYER REPLICATION WATER FUEL CELL -003

November 8, 2008 by
Filed under: Hydrogen Fuel Cell 

Stanley Meyer Replication with 9 inch, 9 tube sets. with an input current of 0.51 Amps from the frequency generator.

Buy illustrated guides, plans and manuals click here

For informational purposes here are some of Stanley Meyers patent excerpts:

Process and apparatus for the production of fuel gas

Water molecules are broken down into hydrogen and oxygen gas atoms in a capacitive cell by a polarization and resonance process dependent upon the dielectric properties of water and water molecules. The gas atoms are thereafter ionized or otherwise energized and thermally combusted to release a degree of energy greater than that of combustion of the gas in ambient air.

Method for the production of a fuel gas

A method for obtaining the release of a fuel gas mixture including hydrogen and oxygen from water in which the water is processed as a dielectric medium in an electrical resonant circuit.

Gas electrical hydrogen generator

A hydrogen gas generator system for converting water into hydrogen and oxygen gasses, in combination with a magnetic particle accelerator for voltage/current electrical potential generation. The hydrogen gas generator encompasses an array of plates immersed in a housing and having natural water pass therethrough. Direct current, voltage dependant/current limited, potential applied to the plates causes the hydrogen/oxygen gasses to disassociate from the water molecule. The upper portion of the container is a hydrogen/oxygen mixture collection chamber for maintaining a predetermined gas pressure. There is introduced into the hydrogen/oxygen collection chamber, from a source, a substantial quantity of permanently magnetically polarized particles. Attached to the gas collection chamber outlet is a non-magnetic, non-conductive closed loop of tubing. The polarized magnetic particles are caused to circulate in the closed loop tubing by an electrical and/or mechanical pump.

Here are some illustrated guides, plans and manuals click here

Tags: , , , , , , , , , , , , , , , , , , ,

Comments

26 Comments on RAVI ‘S STANLEY MEYER REPLICATION WATER FUEL CELL -003

  1. AzureApprentice on Sat, 8th Nov 2008 12:24 am

    2. whoa can you please send me the info as well? I’ve long been interested in alternate energy sources and how to make them, and would be honored if you would share this with me. *many thanks, keep it up!

  2. raviwfc on Sat, 8th Nov 2008 12:24 am

    3. As per Stans Canadian Patent tubes are 3.75 times more efficient than plates for this process.

    R.

  3. bergweg on Sat, 8th Nov 2008 12:24 am

    4. Can one use plates instead of tubes?

  4. Majinblaze on Sat, 8th Nov 2008 12:24 am

    5. Srsly….WTF?

  5. raviwfc on Sat, 8th Nov 2008 12:24 am

    6. I have just sent a mail to your youtube id.

    Check the links in there about this unit. All the info needed to build this is there.

    R.

  6. jylp4u on Sat, 8th Nov 2008 12:24 am

    7. can make make me one and i pay you for it or send me a list of items i’ll ned and plans on how i can make it?

  7. Solarius1 on Sat, 8th Nov 2008 12:24 am

    8. Hi raviwfc, nice videos

  8. Reverseflush on Sat, 8th Nov 2008 12:24 am

    9. Water=life

    Blow+job=blowjob

    Sun=energy

  9. AircondGypsy on Sat, 8th Nov 2008 12:24 am

    10. overunity, overunity, overunity….. who put thr energy potential in the water (H2O) ? Man woman? no its there inherently we are only now finding ways to unlock the explosive ammounts of energy in what we think of as an inert substance. WATER

  10. raviwfc on Sat, 8th Nov 2008 12:24 am

    11. sorry i meant above video not above pic.

    R.

  11. raviwfc on Sat, 8th Nov 2008 12:24 am

    12. The pics of the bifilars are posted on overunity(dot)com thread. The VIC is with a toroid and bifilar wound inductors..one for each of the 9 tubes..but the above pic is with regular wound inductors as per D14.

    R.

  12. dreamyear on Sat, 8th Nov 2008 12:24 am

    13. grrrr..i don’t see coil in your video. how did u manged to reduce the amp without Bifilar Coils?

  13. raviwfc on Sat, 8th Nov 2008 12:24 am

    14. You could check on oupower (dot) com & overunity (dot) com for my postings and all the info required to build this. Go to panaceauniversity(dot)org and download D14.pdf for the circuit and tubes info.

    R.

  14. TheSaint135 on Sat, 8th Nov 2008 12:24 am

    15. can you disclose the exact frecuency/wave and the diameters of the tubes?

  15. NewScience007 on Sat, 8th Nov 2008 12:24 am

    16. A website that sells fuel cells is:
    fuelcellstore

    You can find a variety of fuel cells there.

    The reason to use a fuel cell is ease of demonstration of the over-unity phenomenon, showing that you are indeed getting more energy out than you are putting in.

  16. NewScience007 on Sat, 8th Nov 2008 12:24 am

    17. I know :)

  17. TiczonFamily on Sat, 8th Nov 2008 12:24 am

    18. this is not his invention. its his replication of Stamley Meyer.

  18. TiczonFamily on Sat, 8th Nov 2008 12:24 am

    19. With this enormous amount of 2H released you can put those 2H in a STORAGE. Well, the best storage …for me is the STAINLESS one with HYDRIDE. As we all know hydride can absorb hydrogen and keep it in, unless you want to use your stored energy. You can find HYDRIDE probably your laptop has it (Nickel-hydride Battery) and place it inside your stainless cylinder storage. now you can keep your 2H for useful application. Good Job! (i use zinc at the bottom) hehehe

  19. NewScience007 on Sat, 8th Nov 2008 12:24 am

    20. If your invention truly works and produces over-unity H2O, I would suggest you buy a hydrogen fuel cell and try feeding the H2O into it. This would generate electricity which then could be feed back into the WFC and the excess could power another load. Therefore, creating a machine that only requires water to run and produces no pollution.

    Search “hydrogen fuel cell” in Google for more info.

  20. raviwfc on Sat, 8th Nov 2008 12:24 am

    21. This is a Stanley Meyer Replication..as per his patents for this process tubes are 3.75x more efficient. This is High Volt Low Amp process and is the opposite of the electrolysis process where plates are used

    R.

  21. dryadiabatic on Sat, 8th Nov 2008 12:24 am

    22. Great video! what is the frequency that you are putting into the cell. I am also expermimenting with a tubular cell and was wondering why you decided to use tubes instead of flat plates. There are more people on Youtube using flat plates that tubes

    DAB

  22. misterjingle94 on Sat, 8th Nov 2008 12:24 am

    23. Hi,
    Can I do it with a frequency generator? or is it works with hight voltage? (in this case,I should do the electric circuit)

  23. raviwfc on Sat, 8th Nov 2008 12:24 am

    24. Incase youre looking for the volumes check video -009.

    PSI could be useful if you intend to store the generated gases in pressurized cylinders…but in this case you have the oxidizer premixed with the H2…it would be extremely dangerous to store at high pressure.

  24. LostInMadness220 on Sat, 8th Nov 2008 12:24 am

    25. Can you get a psi on that thing?

  25. raviwfc on Sat, 8th Nov 2008 12:24 am

    26. Well im a mechanical engineer and one of my electives was automobile engg….so I can do it if need be but im not taking that risk at present…

  26. T.Koch on Sat, 15th Jan 2011 5:38 am

    27. I’ve built a WFC using plates. The gas yeild is quite enomous visually, but my biggest problem is that the gas is not flammable. How long does it take to condition the cell or how long does it take to start producing flammable gas.

Tell me what you're thinking...
and oh, if you want a pic to show with your comment, go get a gravatar!